Backfill ASTM AZ63 type Magnesium Sacrificial anode for cathodic protection

Magnesium Anode with backfill

Product Introduction:

     Magnesium anodes come in all shapes and sizes. The magnesium in a packaged anode weighs from 1 pound to 50 pounds. The most commonly used anode in worldwide is a 17 pound anode. With 28 pounds of powdered backfill packed around the magnesium, a packaged 17 pound anode weighs about 45 pounds. It comes with 10 feet or 15 feet of #12, insulated solid copper wire. The backfill consists of 75% powdered gypsum, 20% powdered bentonite clay and 5% sodium sulfate. This mixture is a low cost, nonhazardous, electrically conductive earth backfill. 

     A cotton bag holds the backfill around the inner metal bar. It decomposes over time in the ground. The anode is shipped in an outer disposable, plastic or paper bag to protect it from rain or snow. It is recommended that 5 gallons of water be poured on the anode after it is placed in the earth to wet the backfill. This lowers the resistance between the magnesium and the earth causing more electric current to flow. This provides more protective current than would be possible in dry soil.
 

Application:

1) -for above ground storage tank bottoms

2) -for reinforced concrete structures

3) - for under ground storge tank

4) - for fine sand environment

5) - for environment evolution of O2,Cl2 or a combination of both

6) - other by custom design size and dimension

Company Brief Introduction:

We are a professional anode supplier over 16 years ,mainly supply:

* Zinc anodes (ASTM B418-95 US MILL 18001K)

* Al-Zn-In anodes (GAIII)

* Magnesium anodes ( ASTM-G97)

* High silicon cast iron anodes ( ASTM-A518-3,BS1591)

We can also accept customized anodes with your logo according to your drawing !

Company Principle:

Our Belief:    Continuous Innovation.

Our Spirit:     Sincerity, Unity, Dedicated, Hardworking.

Our Mission: Provide most advanced products & most professional technical solution.